Impact of Copper Grain Size on TSV Behavior During Annealing
Author Information
Author(s): Xi Yang, Zhang Yunpeng, Tian Zhiqaing, Liu Tianjian, Sheng Can, Zhao Bo, Zhang Zhaofu, Wang Shizhao
Primary Institution: Wuhan University
Hypothesis
The sidewall grain condition significantly influences the thermo-mechanical behavior of through-silicon vias (TSVs) during the annealing process.
Conclusion
Smaller sidewall grain sizes lead to increased protrusion in TSV-Cu during annealing, with a maximum deviation of 6.735% relative to average grain conditions.
Supporting Evidence
- The yield strength of TSV-Cu was found to be 74.6 MPa.
- The hardening exponent for the material was determined to be 0.514.
- Protrusion due to sidewall grain size can reach up to 14.615% relative to average conditions.
- Grain sizes in the sidewall region were smaller than those in the central region.
Takeaway
This study shows that the size of the tiny grains in copper affects how much they stick out after heating, which is important for making reliable electronic connections.
Methodology
The study used finite element modeling (FEM) and nanoindentation to analyze the mechanical properties of TSV-Cu with varying grain sizes.
Limitations
The study primarily focuses on the sidewall grain size and may not account for all factors influencing TSV behavior.
Digital Object Identifier (DOI)
Want to read the original?
Access the complete publication on the publisher's website