Fatigue behavior of sintered, glazed and glass-infiltrated surfaces of 5Y-PSZ bonded plates
2024

Fatigue Behavior of Different Surface Finishes on Zirconia Plates

Sample size: 15 publication Evidence: moderate

Author Information

Author(s): da Silva Ana Carolina, Ortiz Laura Patrícia Nadal, Alves Larissa Márcia Martins, Dapieve Kiara Serafini, Campos Tiago Moreira Bastos, Bottino Marco Antonio, Thim Gilmar Patrocínio, Valandro Luiz Felipe, Marinho Renata Marques de Melo

Primary Institution: Universidade Estadual Paulista – Unesp, Institute of Science and Technology, Department of Dental Materials and Prosthodontics, São José dos Campos, SP, Brazil.

Hypothesis

The distinct occlusal surface finishes do not affect the fatigue strength of PSZ.

Conclusion

Different surface finishes (glaze and silica glass infiltration) had no negative impact on the fatigue behavior of bonded zirconia plates.

Supporting Evidence

  • All surface finishes behaved similarly in terms of fatigue effects.
  • Silica glass infiltration resulted in the smoothest surface.
  • Failures started at the bonding surface for all groups.

Takeaway

This study looked at how different surface treatments on zirconia plates affect their strength. It found that the treatments didn't change how well the plates held up under stress.

Methodology

The study involved creating zirconia plates with different surface finishes and testing their fatigue behavior under controlled conditions.

Limitations

The study used a simplified plate model and did not account for temperature variations or off-center movements during testing.

Statistical Information

Statistical Significance

p<0.05

Digital Object Identifier (DOI)

10.1590/1807-3107bor-2024.vol38.0027

Want to read the original?

Access the complete publication on the publisher's website

View Original Publication