Electrochemical advanced oxidation combined to electro-Fenton for effective treatment of perfluoroalkyl substances “PFAS” in water using a Magnéli phase-based anode
2025

Effective Treatment of PFAS in Water Using Electrochemical Methods

publication Evidence: high

Author Information

Author(s): Gomri Chaimaa, Makhoul Elissa, Koundia Fatou Niang, Petit Eddy, Raffy Stéphane, Bechelany Mikhael, Semsarilar Mona, Cretin Marc

Primary Institution: Institut Européen des Membranes-IEM (UMR 5635), Univ Montpellier, CNRS, ENSCM

Hypothesis

Can electrochemical advanced oxidation combined with electro-Fenton effectively degrade PFAS in water?

Conclusion

The study found that combining electro-oxidation with electro-Fenton achieved 92% degradation of PFOA and complete removal of PFOS in 5 hours.

Supporting Evidence

  • 52% of PFOA and 82% of PFOS were removed after 5 hours of treatment using electro-oxidation.
  • Combining electro-oxidation with electro-Fenton increased PFOA degradation to 92% and achieved complete PFOS removal.
  • The energy consumption for combined treatment was significantly lower than for electro-oxidation alone.

Takeaway

This study shows that a special type of anode can help clean harmful chemicals from water really well, especially when two methods are used together.

Methodology

The study used a Ti4O7 anode for electro-oxidation and electro-Fenton processes to degrade PFOA and PFOS in water.

Limitations

Further optimization is needed for large-scale applications.

Digital Object Identifier (DOI)

10.1039/d4na00626g

Want to read the original?

Access the complete publication on the publisher's website

View Original Publication