Investigation of the atomic layer etching mechanism for Al2O3 using hexafluoroacetylacetone and H2 plasma
2025

Atomic Layer Etching of Al2O3 Using Hhfac and H2 Plasma

publication Evidence: high

Author Information

Author(s): Chittock Nicholas J., Maas Joost F. W., Tezsevin Ilker, Merkx Marc J. M., Knoops Harm C. M., Kessels Wilhelmus M. M., Mackus Adriaan J. M.

Primary Institution: Eindhoven University of Technology

Hypothesis

The study investigates the mechanism of atomic layer etching (ALE) for Al2O3 using hexafluoroacetylacetone (Hhfac) and H2 plasma.

Conclusion

The study successfully developed an ALE process that allows for precise control of Al2O3 film thickness with minimal contamination.

Supporting Evidence

  • The ALE process achieved an etch rate of 0.16 ± 0.02 nm per cycle.
  • The study demonstrated a high ALE synergy of 98%.
  • FTIR analysis showed no residue of Hhfac after H2 plasma exposure.
  • The process allows for sub-nm control of film thickness.
  • High selectivity to SiO2 was observed, indicating minimal etching of the mask.

Takeaway

This study shows how a special chemical process can help make very thin layers of a material without messing it up.

Methodology

The ALE process involves alternating doses of Hhfac and H2 plasma, with in situ monitoring of film thickness using spectroscopic ellipsometry.

Limitations

The study primarily focuses on Al2O3 and may not be directly applicable to other materials without further investigation.

Digital Object Identifier (DOI)

10.1039/d4tc03615h

Want to read the original?

Access the complete publication on the publisher's website

View Original Publication