Degradation characteristics of 3D printed continuous fibre-reinforced PA6/chopped fibre composites in simulated saltwater
2025

Degradation of 3D Printed Fibre-Reinforced Composites in Saltwater

Sample size: 4 publication 10 minutes Evidence: moderate

Author Information

Author(s): Ghabezi Pouyan, Flanagan Tomas, Walls Michael, Harrison Noel M.

Primary Institution: University of Galway

Hypothesis

How do continuous fibre-reinforced 3D printed composites perform in saltwater over time?

Conclusion

The study found that 3D printed Onyx composites experience significant mechanical degradation when exposed to saltwater, with pure Onyx showing the most severe reductions in strength.

Supporting Evidence

  • Onyx samples without continuous fibres experienced a 33.54% reduction in tensile strength after 1 year.
  • Continuous carbon fibre-reinforced Onyx samples showed lower strength reductions of 28.46% in tensile strength after 1 year.
  • The study highlighted the importance of material composition in determining degradation rates in saltwater.

Takeaway

This study looked at how 3D printed materials break down in salty water. It found that some materials get weaker over time, especially if they don't have strong fibres inside.

Methodology

The study involved fabricating 3D printed samples with different fibre reinforcements and testing their mechanical properties before and after aging in saltwater.

Limitations

The study may not account for all environmental factors affecting degradation in real-world marine conditions.

Digital Object Identifier (DOI)

10.1007/s40964-024-00654-5

Want to read the original?

Access the complete publication on the publisher's website

View Original Publication